Czinger 21C hypercar to make Goodwood FoS debut

The eccentric Czinger 21C hypercar is making its Goodwood FoS debut this week, and it's making a trip up the famous hillclimb

Up-and-coming supercar manufacturers are not unusual in our contemporary age of electric supercars, but there might be one or two reasons why Czinger, a new Los Angeles-based company, might just shine a little brighter than most. Its 21C will make its Goodwood FoS debut later this week before first cars are delivered in later 2023.

With the start of production not far away, the hypercar eclipsed the McLaren Senna’s record at Laguna Seca with a 1:25:44 time to become the fastest production car around the world-renowned circuit. Now though, Czinger is tasking FoS veteran and Spa 24 hour winner Chris Ward with tackling the famous hillclimb.

> GMA T.50s Niki Lauda track-only supercar revealed

As McLaren found in the early ’90s, if there’s something that can set you apart from the crowd, an unusual seating arrangement can be it. Designed, engineered, developed and manufactured in the USA, the Czinger 21C differs from almost all other supercars with its tandem seating position, placing the passenger behind the driver. Only seen elsewhere on various cab-leaning contraptions and the non-watertight Renault Twizy, the tandem nature of the 21C is, in Czinger’s words, designed for ‘optimal performance and weight distribution’.

Not only does the 21C differ by its layout, but also the fact this is no electric supercar. Instead it’s powered by a highly strung internal combustion engine connected to a hybrid system consisting of an electric motor and battery pack, for an output of 1233bhp and an 11,000rpm red line.

That figure is generated by the combination of a mid-mounted 2.88-litre, flat-plane crank V8 boosted by a pair of turbochargers and driven through a seven-speed automated manual transmission, along with a pair of electric motors, each powering a front wheel.

As you might expect with such a power output and a dry weight quoted as low as 1151kg (for a 1:1 power ratio, like the eponymous Koenigsegg One:1), performance figures are set to be rather impressive. Top speed is quoted at 281mph when fitted with the optional low drag kit, a figure that would make it faster than the Koenigsegg Agera RS and just 1.9mph off the new top speed record holder, SSC’s Tuatara.

The 0-62mph sprint comes in a quoted 1.9sec, 0-186mph (or 300km/h) and back to zero in 13.8 seconds, and 0-248mph (400km/h) to back to nought in what’s probably quite an exciting 27.1 seconds – that’s a fair bit quicker than the 31.49sec achieved by the Koenigsegg Regera in 2019.

Should downforce be a higher priority, the 21C is said to achieve an incredible 2500kg of downforce at 200mph in its most aggressive configuration, with 615kg of that coming at just 100mph.

Something that Czinger does specify is its use of additive manufacturing and advanced composites, taking full advantage of new-age techniques to make the 21C as rigid and lightweight as possible. Peel back the layers and we can see carbonfibre torsional supports and 3D-printed nodes knitting the structure together in a similar way to a traditional tubular steel space frame.

More than just being a lighter and less time-consuming way of producing these sorts of complex shapes, 3D printing also allows engineers and designers to reduce material in non-critical structural points, lending an organic aesthetic quality to these internal components. Complementing the contemporary structure will be fine, book-matched carbon exterior panels, and a simple interior with a single information display ahead of the driver.

Could Czinger be the next small manufacturer to break into the mainstream like Pagani and Koenigsegg have done before? We’ll get a better idea when the first examples hit the road in 2023.

Most Popular

2022 BMW M3 Touring revealed – the Audi RS4 rival we've been waiting for is here!
FOS M3 Touring
BMW M3 Touring

2022 BMW M3 Touring revealed – the Audi RS4 rival we've been waiting for is here!

Wagon lovers rejoice, the new BMW M3 Touring is here exclusively in xDrive Competition specification
21 Jun 2022
New Porsche 911 GT3 RS spotted undisguised
Porsche 911 GT3 RS 2022 992 – rear quarter
Porsche 911 GT3 RS coupe

New Porsche 911 GT3 RS spotted undisguised

Big aero and bespoke bodywork are on the cards for Porsche’s next 911 GT3 RS
21 Jun 2022
New McLaren P1 Spider revealed
Lanzante P1 Spider – front quarter
McLaren P1

New McLaren P1 Spider revealed

McLaren specialist Lanzante unveils bespoke P1 Spider commission at Goodwood Festival of Speed
23 Jun 2022