Bugatti Bolide makes debut at The Quail – 1578bhp hypercar to enter production

With more power, less weight and new high-tech, lightweight components, the Bugatti Bolide will be the most extreme take on the W16 hypercar yet

Bugatti has announced that it will put its extreme, track-only Bolide into production, wrapping a bare-bones, lightweight body around its mighty W16 powertrain and carbon chassis. The first of 40 examples is scheduled for delivery in 2024, with each car costing €4m. 

Though last year’s concept seemed far-fetched even for Bugatti, the marque announced at The Quail that it will cater to customer demand and begin development for a production version of the track-only hypercar. 

> Rimac to develop Bugatti Chiron replacement

President of Bugatti, Stephan Winkelmann, said: ‘The Bolide generated a great deal of enthusiasm and intrigue last year. Following its presentation, a significant number of enthusiasts and collectors asked us to develop the experimental Bolide as a production vehicle. We therefore decided to make the Bolide a few-off in order to give 40 customers the opportunity to experience this incredible vehicle.’

Remarkably, Bugatti believes it can come close to matching the figures announced for the concept last year. Kerb weight is said to be targeted at just 1450kg, 200kg more than the concept, even with the gargantuan powertrain at its core. Now running on more readily-available 98 RON fuel as opposed to 110-octane, peak power is down from 1825bhp to 1578bhp, but this still makes it 100bhp more powerful than the most potent iteration of the W16 so far. Torque sits at 1180lb ft. Should it meet these targets, the Bolide will achieve an astounding power-to-weight ratio of 1088bhp/tonne.

Such a low kerb weight is achieved through a vast spread of weight saving techniques, including the application of 3D printing and biomimicry. Use of this technology has been applied to elements like the mounting hardware for its aero, which features a patented construction similar to that of bone. Printed in titanium, each component has thin outer walls and a complex hollow structure inside, something that only additive manufacturing techniques like 3D printing can achieve. The suspension pushrods are able to transfer up to 3.5 tonnes of force, despite weighing just 100 grams, displaying an astonishing mass-to-strength ratio. This same technology is applied to small components throughout the Bolide, such as the wheel-mounted turbofans cooling the brakes and load-bearing aero components. 

Previously spied testing at Circuit Paul Ricard in France, the Bolide bears little resemblance to its road-going siblings, with a set of proportions that differ markedly from the Chiron. Bugatti’s trademark horseshoe grille does make an appearance, but fronts an entirely new body which has been designed with weight savings, aerodynamics and cooling in mind. Sitting just 995mm off the ground, the marque says its design is reminiscent of the famous Bell X-1 aircraft piloted by Captain Charles ‘Chuck’ Yeager, the first person to break the sound barrier.

At the rear, a complex, stacked rear wing setup can be found, with a central fin mounted on the engine cover likely there to increase stability. An aggressive new diffuser, rain light and mammoth 400-section Michelin slicks are also clear to see; for reference, the Chiron is fitted with 355-section rear tyres.

At its core is Bugatti’s 8-litre quad-turbocharged W16, sending 1578bhp and 1180lb ft of torque to those Michelin slicks. The lighter, more powerful concept was said to cover the 0-62mph sprint in only 2.17sec and hit a top speed of over 310mph, but we’ll have to wait for figures for the production car. The concept was also said to go from 0-249mph and back to standstill in just 24.64sec, 6.84sec faster than the current record holder, Koenigsegg’s Regera.

To ensure the unit can withstand the toils of a track session, Bugatti has optimised its cooling and oil systems whilst also upgrading the four turbochargers to produce more boost at higher engine speeds. A total of three air-cooled charge coolers are employed to help keep the engine, transmission and differential at within suitable operating temperatures, and there’s also a water pre-cooling system there to give the system a helping hand too. 

The Bolide’s real party piece is that 1450kg kerbweight, astonishing considering the immense near-500kg weight of the powertrain. To streamline the weight as much as possible, Bugatti switched from water-to-air cooling to air-to-air, utilised 3D-printed titanium components throughout, included a wound carbonfibre driveshaft, forged magnesium wheels and a completely stripped cabin. 

Suspension is of a pushrod design with the horizontal dampers visible through apertures in the bonnet. Extreme aerodynamics were also high on the agenda, with a peak downforce rating at 199mph reaching 1800kg on the rear axle and 800kg at the front. A ‘morphable outer skin’ is also used for the roof-mounted intake, altering the surface texture at speed to reduce drag by 10%. Bugatti claims that this all allows the Bolide to achieve an incredible lateral acceleration of 2.8G.

Bugatti has embarked on a three year development run for a production variant, with the first of 40 examples scheduled for delivery in 2024. Prices will sit at around €4m.

> Bugatti Chiron Pur Sport – track-focused hypercar makes UK debut

Recommended

Final Bugatti Divo hits the road – production ends for £4.4m hypercar
Final Bugatti Divo
Bugatti

Final Bugatti Divo hits the road – production ends for £4.4m hypercar

Over three years since it was first unveiled to customers, the final Bugatti Divo has rolled out of the Molsheim gates
22 Jul 2021
Rimac to develop Bugatti Chiron replacement
Bugatti-Rimac – fronts
Bugatti

Rimac to develop Bugatti Chiron replacement

Porsche takes 45 percent control of new Bugatti-Rimac tech firm that will develop future EV hypercars
5 Jul 2021
£7.3m Bugatti Centodieci continues development ahead of 2022 deliveries
Bugatti Centodieci front
Bugatti

£7.3m Bugatti Centodieci continues development ahead of 2022 deliveries

The limited-build Bugatti Centodieci channels its ’90s predecessor for ten lucky buyers
11 Feb 2021

Most Popular

2022 BMW M3 Touring teased ahead of reveal
2022 BMW M3 Touring
BMW M3

2022 BMW M3 Touring teased ahead of reveal

BMW has released new images of its upcoming M3 Touring before it reaches customers next year
24 Sep 2021
Porsche 911 Carrera 4 GTS 2022 review – middle child 992 shapes up
Porsche 911 GTS review (992) – front cornering
Porsche 911 Carrera

Porsche 911 Carrera 4 GTS 2022 review – middle child 992 shapes up

Two and a half years after the launch of the 992, the GTS treatment both adds and subtracts but does the result gel on the road?
21 Sep 2021
Lotus Emira First Edition priced from £75,995 – production to commence in 2022
Lotus Emira
Lotus

Lotus Emira First Edition priced from £75,995 – production to commence in 2022

First examples of the new Lotus Emira will roll off the production line early next year, with the entry-level four-cylinder to follow
20 Sep 2021