New footage of Koenigsegg Gemera released – three-cylinder GT with 1700bhp continues development

The Koenigsegg Gemera represents not just a new era for the Swedish hypercar manufacturer in terms of powertrain layout and design, but also useability – this is an “everyday” Koenigsegg. Shown in motion for the first time at the marque’s Ängelholm test facility, company CEO Christian von Koenigsegg has revealed a first taste of its unique exhaust note.

As fitted to an early prototype, the Gemera’s 2-litre three-cylinder engine still has extensive development and tuning to complete, but for now reveals its unusual, undeniably boosted engine note. As development continues, power levels and RPM will be increased, with this prototype engine capped to just 4500rpm, 4000rpm short of its targeted 8500rpm peak. 

The new Gemera’s layout might diverge from its usual V8 base, but it certainly lives up to Koenigsegg’s reputation with a 1.27 megawatt, or 1700bhp (combined) power figure. Generating that combined power figure with the aforementioned combustion engine are a total of three electric motors drawing power from a 16.6kWh lithium ion battery pack.

Two of the electric motors are situated on the rear axle and power each of the rear wheels. Together these motors produce an equivalent power figure of 1100bhp, while the third, smaller electric motor is mounted within the crankcase of the bespoke internal combustion engine. 

43

The internal combustion engine itself, non-ironically named TFG (Tiny Friendly Giant) internally, is all-new and bespoke to Koenigsegg. Augmenting the dry-sumped twin-turbocharged petrol engine is Koenigsegg’s infinitely variable valve system (Freevalve in Koenigsegg speak) that are hydraulically-actuated rather than driven off the camshaft. Power figures for the engine itself are rated at a peak of 600bhp at 7500rpm, with 412lb ft of torque spread between 2000-6000rpm.

The advantages of the Freevalve system are numerous, but a highlight is how it’s able to sync with the two turbochargers, as each is connected to a single valve from each cylinder. This allows Koenigsegg to route all the exhaust gases from each of the three cylinders into one turbocharger at medium-to-high load but low rpm helping the turbo spin faster until there is sufficient flow to spin both – a clever, efficient way of improving response, without throwing fuel at the problem (anti-lag anyone?).

The petrol engine and its corresponding electric motor are then driven by the same type of single-speed torque-converter transmission as debuted in the Regera, which relies on its electric motors to provide thrust with far less parasitic losses than a traditional transmission. The twist is that despite being mid-mounted, the combustion engine powers the front wheels, making the Gemera all-wheel drive. Together, these four different propulsion elements fire the Gemera to 62mph in 1.9sec, and Koenigsegg estimates it’ll brush the 250mph mark.

43

To fit all of this new tech, plus four full-sized seats into the package, Koenigsegg has designed an all-new carbonfibre chassis topped and tailed by aluminium subframes, from which double-wishbone suspension hangs. The dampers are adaptive, and feature hydraulically-adjustable ride adjustment and a nose lift.

The design is based around an entirely new proportion set too, but the overall design language is shared with other models featuring a similar wrap-around front screen and side window aesthetic. The massive doors open upwards and outwards (Koenigsegg doesn’t do normal doors) revealing an interior dominated by a new floating central infotainment display and dash layout, highlighting the low scuttle and extended interior space. 

Prices have not been specified as yet, but like most, if not all Koenigseggs, the Gemera will be well into seven figures. Like it has for much of its existence, Koenigsegg looks to be forging its own path, one that certainly doesn’t favour simplicity for simplicity’s sake.

> 1600bhp Koenigsegg Jesko enters production ahead of 2022 deliveries